What points do GRC lines need to pay attention to when operating?

What are the points to pay attention to when GRC lines are operated? The following GRC manufacturer Xiaobian now share with you.

GRC line operation points:

1, hanging grc products in order on the whole building should be hung from the top to the bottom, the upper to the horizontal line shall prevail, grc line bottom hanging, to use the rule to check and correct, to ensure that the whole building line facade vertical, not up and down the uneven phenomenon, products between the seam control in about 5mm.

2, the joint is mixed with grc cement mortar and acrylic adhesive, and the adhesive is configured to fill the joint three times, and the interval of each caulking is more than 24h.

3. The junction between the product and the base is caulked with sealing paste, and the junction with the aluminum alloy surface is sealed with neutral silicone sealant.

4, the fasteners should be galvanized, buried grc exposed parts, steel bars and welds should be anti-corrosion treatment, generally red lead anti-rust paint.

5, control the diameter and depth of the drilling hole, strictly control the depth of the expansion bolt buried in more than 80mm, in line with the design requirements, if necessary, do the pull test.

6. Do a good job of acceptance of concealed works during the construction phase.

The above is the relevant information about GRC line operation precautions. Anhui Huiliao Building Decoration Engineering Co., LTD., is a set of GRC manufacturers, UHPC manufacturers, washed stone manufacturers as one, specializing in GRC, GFRC, HPC, UHPC building decoration materials research and development, design, production and installation of large-scale comprehensive enterprises, in the GRC industry is a very influential enterprise.